3/10/2024 0 Comments Keil arm mdk lite 32 bit![]() However, the watchdog may trigger while the board communicates with the Oracle ME SDK and NetBeans, especially during debugging. The watchdog resets the system if a program appears to be stuck. In the file platform.cfg, disable the watchdog by setting its value to false: The following is an example of configuring options for using static IP addresses: ![]() If your network uses static IP addresses, uncomment and edit the lines under Static IP Address and comment the line under Dynamic IP Address. ![]() If your network uses dynamic IP addresses, uncomment the DHCP line under Dynamic IP Address and comment the lines under Static IP Address. ![]() The MAC address must comply with the IEEE 802.3 standard. # - It should be unique value in the same LAN The following is an example of a MAC address: Open the file platform.cfg on the root directory of the SD card to specify the appropriate networking information for the device.Įdit the MAC address if you have more than one board in your local network or if you think that there is a MAC address conflict. Next, rename the file rtc_upd.cfg to rtc.cfg. For example, the file rtc_upd.cfg could contain the following: (This can be done by opening the file with a standard text editor.) Edit the current time and date that the device should use, in the format YYYY/MM/DD HH:MM:SS Zone. The STMicroelectronics STM32F407VG is a Core - ARM 32-bit Cortex-M4 CPU with FPU - Adaptive real-time accelerator (ART Accelerator) - 168 MHz maximum frequency, 210 DMIPS/1.25 DMIPS/MHz - Memory protection unit Memories - Up to 1 Mbyte of Flash memory - Up to 192+4 Kbytes of SRAM - Flexible static memory controller (supports Compact Flash, SRAM, PSRAM, NOR, NAND memories) LCD parallel interface, 8080/6800 modes Clock, reset and supply management - 1.7 V to 3.6 V application supply and I/Os - POR, PDR, PVD and BOR - 4 to 25 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC - 32 kHz oscillator for RTC with calibration - Internal 32 kHz RC with calibration Low power - Sleep, Stop, Standby modes - VBAT supply for RTC, 20x32 bit backup registers + optional 4 KB backup SRAM 3 x 12-bit, 0.41 us A/D converters - up to 24 channels 2 x 12-bit D/A converters General-purpose DMA - 16-stream DMA controller with centralized FIFOs and burst support Up to 17 timers - up to 12 16-bit and 2 32-bit timers up to 150 MHz Debug mode - Serial wire debug (SWD) & JTAG - Cortex-M4 Embedded Trace Macrocell Up to 140 I/O ports with interrupt capability - Up to 136 fast I/Os up to 60 MHz - Up to 138 5 V-tolerant I/Os Up to 15 communication interfaces - Up to 3 x I2C interfaces - Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816, LIN, IrDA, modem control) - Up to 3 SPIs (37.5 Mbits/s) - 2 x CAN interfaces (2.0B Active) - SDIO interface Advanced connectivity - USB 2.0 FS device/host/OTG controller with on-chip PHY - USB 2.0 HS/FS device/host/OTG controller with dedicated DMA, on-chip FS PHY and ULPI - 10/100 Ethernet MAC with dedicated DMA 8 to 14-bit parallel camera interface up to 67.2 Mbytes/s Cryptographic acceleration - Hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1) Analog true random number generator CRC calculation unit, 96-bit unique ID RTC: subsecond accuracy, hardware calendar.Once the formatting completes, copy all the files inside the directory sd_card/ in the Oracle Java ME Embedded distribution to the root directory of the SD card.Įdit the file rtc_upd.cfg on the root directory of the SD card. Home / Device Database ® STMicroelectronics STM32F407VG
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |